Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer
Efficiency: Check heat loss, floor, water temperature, zoning and permits. Efficiency depends on water temp/insulation.
Why it matters
The part people skip in efficiency is Water temp, Insulation, Spacing; without it the conclusion is unreliable.
Step by step
- Run a room-by-room heat loss calculation.
- Check whether the floor can host tubing.
- Choose the heat source from the required water temperature.
- Then plan zoning and controls.
Common mistakes
- Skipping the heat loss calculation.
- Spacing set too wide.
- Missing insulation below.
- Using a heat source that cannot reach the water temperature.
Checklist
- Heat loss/floor/water temp/zoning/permits.
- Floor section drawing.
- Heat source spec.
- Three quotes.
- Control plan.
Who it is for
If this is your first Efficiency, narrow by Water temp. and Insulation. first, then look at specific models.
Key facts
- Water temp.
- Insulation.
- Spacing.
FAQ
Efficiency: Before You Start Checklist
Efficiency: Check heat loss, floor, water temperature, zoning and permits. Efficiency depends on water temp/insulation.
What should I check before buying a Efficiency?
Efficiency depends on water temp/insulation. Key checks: Water temp.; Insulation..
Is a Efficiency worth it?
Depends on use, budget and upkeep; a Efficiency is not automatically better because it costs more.
Source: Natural Resources Canada