Common mistakes: Check heat loss, floor, water temperature, zoning and permits. Mistakes depends on heat loss/tubing/price.
Why it matters
The part people skip in common mistakes is No heat loss calc, Too wide spacing, Skipping insulation; without it the conclusion is unreliable.
Step by step
- Run a room-by-room heat loss calculation.
- Check whether the floor can host tubing.
- Choose the heat source from the required water temperature.
- Then plan zoning and controls.
Common mistakes
- Skipping the heat loss calculation.
- Spacing set too wide.
- Missing insulation below.
- Using a heat source that cannot reach the water temperature.
Checklist
- Heat loss/floor/water temp/zoning/permits.
- Floor section drawing.
- Heat source spec.
- Three quotes.
- Control plan.
Who it is for
If this is your first Common mistakes, narrow by No heat loss calc. and Too wide spacing. first, then look at specific models.
Key facts
- No heat loss calc.
- Too wide spacing.
- Skipping insulation.
FAQ
Common mistakes: Before You Start Checklist
Common mistakes: Check heat loss, floor, water temperature, zoning and permits. Mistakes depends on heat loss/tubing/price.
What should I check before buying a Common mistakes?
Mistakes depends on heat loss/tubing/price. Key checks: No heat loss calc.; Too wide spacing..
Is a Common mistakes worth it?
Depends on use, budget and upkeep; a Common mistakes is not automatically better because it costs more.
Source: Natural Resources Canada