Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer
Budget: Save with insulation, zoning and room-by-room design. Budget depends on area/heat source/price.
Why it matters
budget hinges on Area, Heat source, Controls; when any of these is unclear, money tends to go to the wrong step.
Step by step
- Run a room-by-room heat loss calculation.
- Check whether the floor can host tubing.
- Choose the heat source from the required water temperature.
- Then plan zoning and controls.
Common mistakes
- Skipping the heat loss calculation.
- Spacing set too wide.
- Missing insulation below.
- Using a heat source that cannot reach the water temperature.
Checklist
- Heat loss/floor/water temp/zoning/permits.
- Floor section drawing.
- Heat source spec.
- Three quotes.
- Control plan.
Who it is for
If budget comes first, protect Area. and Heat source. before looking at price; cheap but missing key items is not value.
Key facts
- Area.
- Heat source.
- Controls.
FAQ
Budget: Avoiding Wasted Spend
Budget: Save with insulation, zoning and room-by-room design. Budget depends on area/heat source/price.
What should I check before buying a Budget?
Budget depends on area/heat source/price. Key checks: Area.; Heat source..
Is a Budget worth it?
Depends on use, budget and upkeep; a Budget is not automatically better because it costs more.
Source: Natural Resources Canada