Skip to content
GUIDEDeep dive

Water Temperature Decides Everything

Floor surface temperature is capped (about 27–29 °C in occupied areas), so output depends on spacing and water temperature; too low and you have warm tiles, not heat.

Updated 2026-11-19 · Formula checked

Three variables

Supply temperature: commonly 35–45 °C; heat pumps work but low-temperature designs suit them.

Spacing: 150 mm delivers roughly 40–60% more than 300 mm.

Finish: tile conducts well; thick carpet sharply reduces output.

How to verify

Ask for room-by-room supply temperature, spacing and calculated output in W/m².

Compare output to heat loss instead of pricing by area.

If output is below heat loss, add emitters or raise water temperature.

Sources

Retrofit: Can the Floor Host TubingRead guide

Check your use case first

Five things to check before ordering

How to compare specs

When not to buy

Budget and alternatives

Common mistakes

How we check these numbers

This guide does three things: it breaks costs and conditions into checkable line items, it marks which figures come from official sources, and it flags what varies by city, year or personal situation. We do not treat a single quote as a universal conclusion, and we do not cite percentages we cannot trace.

If you remember one thing: use the checklist here to question quotes, not a single total to compare them.

KEEP READING

Keep reading

Read in order, or jump to another guide on the same topic.

All guides →

None

Top picks

Radiant Installer

Install

Check price
Electric Mat

Electric mat

Check price
Boiler

Heat source

Check price

Affiliate disclosure: this page links to commercial partners; we currently pass no tracking parameters, so we earn no commission from them.

Sources