Skip to content
CANADA RADIANT / Cost

Cost: Cost per Square Metre

Cost: Convert tubing, insulation, heat source and controls into cost per m².

Updated 2026-11-19About 3 min
Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer

Cost: Convert tubing, insulation, heat source and controls into cost per m². Cost depends on area/tubing/boiler/price.

Why it matters

Start with Area, Tubing; the cost and outcome of cost follow from those.

Step by step

  1. Run a room-by-room heat loss calculation.
  2. Check whether the floor can host tubing.
  3. Choose the heat source from the required water temperature.
  4. Then plan zoning and controls.

Common mistakes

  • Skipping the heat loss calculation.
  • Spacing set too wide.
  • Missing insulation below.
  • Using a heat source that cannot reach the water temperature.

Checklist

  • Heat loss/floor/water temp/zoning/permits.
  • Floor section drawing.
  • Heat source spec.
  • Three quotes.
  • Control plan.

Who it is for

If you are calculating total cost, include Area., Tubing. and upkeep, not just the purchase price.

Key facts

  • Area.
  • Tubing.
  • Boiler.

FAQ

Cost: Cost per Square Metre

Cost: Convert tubing, insulation, heat source and controls into cost per m². Cost depends on area/tubing/boiler/price.

What should I check before buying a Cost?

Cost depends on area/tubing/boiler/price. Key checks: Area.; Tubing..

Is a Cost worth it?

Depends on use, budget and upkeep; a Cost is not automatically better because it costs more.

Source: Natural Resources Canada

Top picks

ProductBest forPrice
Radiant InstallerInstallHighCompare prices
BoilerHeat sourceHighCompare prices
InsulationInsulationLowCompare prices

Sources