Getting started: Convert tubing, insulation, heat source and controls into cost per m². Start depends on floor/heat source/budget.
Why it matters
Start with Floor, Heat source; the cost and outcome of getting started follow from those.
Step by step
- Run a room-by-room heat loss calculation.
- Check whether the floor can host tubing.
- Choose the heat source from the required water temperature.
- Then plan zoning and controls.
Common mistakes
- Skipping the heat loss calculation.
- Spacing set too wide.
- Missing insulation below.
- Using a heat source that cannot reach the water temperature.
Checklist
- Heat loss/floor/water temp/zoning/permits.
- Floor section drawing.
- Heat source spec.
- Three quotes.
- Control plan.
Who it is for
If you are calculating total cost, include Floor., Heat source. and upkeep, not just the purchase price.
Key facts
- Floor.
- Heat source.
- Budget.
FAQ
Getting started: Cost per Square Metre
Getting started: Convert tubing, insulation, heat source and controls into cost per m². Start depends on floor/heat source/budget.
What should I check before buying a Getting started?
Start depends on floor/heat source/budget. Key checks: Floor.; Heat source..
Is a Getting started worth it?
Depends on use, budget and upkeep; a Getting started is not automatically better because it costs more.
Source: Natural Resources Canada