Skip to content
Home/Answers/Garages and shops
CANADA RADIANT / Garages and shops

Garages and shops: Cost per Square Metre

Garages and shops: Convert tubing, insulation, heat source and controls into cost per m².

Updated 2026-11-19About 3 min
Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer

Garages and shops: Convert tubing, insulation, heat source and controls into cost per m². Garage depends on slab/freeze/price.

Why it matters

Start with Slab, Freeze protection; the cost and outcome of garages and shops follow from those.

Step by step

  1. Run a room-by-room heat loss calculation.
  2. Check whether the floor can host tubing.
  3. Choose the heat source from the required water temperature.
  4. Then plan zoning and controls.

Common mistakes

  • Skipping the heat loss calculation.
  • Spacing set too wide.
  • Missing insulation below.
  • Using a heat source that cannot reach the water temperature.

Checklist

  • Heat loss/floor/water temp/zoning/permits.
  • Floor section drawing.
  • Heat source spec.
  • Three quotes.
  • Control plan.

Who it is for

If you are calculating total cost, include Slab., Freeze protection. and upkeep, not just the purchase price.

Key facts

  • Slab.
  • Freeze protection.
  • Load.

FAQ

Garages and shops: Cost per Square Metre

Garages and shops: Convert tubing, insulation, heat source and controls into cost per m². Garage depends on slab/freeze/price.

What should I check before buying a Garages and shops?

Garage depends on slab/freeze/price. Key checks: Slab.; Freeze protection..

Is a Garages and shops worth it?

Depends on use, budget and upkeep; a Garages and shops is not automatically better because it costs more.

Source: Natural Resources Canada

Top picks

ProductBest forPrice
Radiant InstallerInstallHighCompare prices
BoilerHeat sourceHighCompare prices
InsulationInsulationLowCompare prices

Sources