Common mistakes: Convert tubing, insulation, heat source and controls into cost per m². Mistakes depends on heat loss/tubing/price.
Why it matters
The part people skip in common mistakes is No heat loss calc, Too wide spacing, Skipping insulation; without it the conclusion is unreliable.
Step by step
- Run a room-by-room heat loss calculation.
- Check whether the floor can host tubing.
- Choose the heat source from the required water temperature.
- Then plan zoning and controls.
Common mistakes
- Skipping the heat loss calculation.
- Spacing set too wide.
- Missing insulation below.
- Using a heat source that cannot reach the water temperature.
Checklist
- Heat loss/floor/water temp/zoning/permits.
- Floor section drawing.
- Heat source spec.
- Three quotes.
- Control plan.
Who it is for
If you are calculating total cost, include No heat loss calc., Too wide spacing. and upkeep, not just the purchase price.
Key facts
- No heat loss calc.
- Too wide spacing.
- Skipping insulation.
FAQ
Common mistakes: Cost per Square Metre
Common mistakes: Convert tubing, insulation, heat source and controls into cost per m². Mistakes depends on heat loss/tubing/price.
What should I check before buying a Common mistakes?
Mistakes depends on heat loss/tubing/price. Key checks: No heat loss calc.; Too wide spacing..
Is a Common mistakes worth it?
Depends on use, budget and upkeep; a Common mistakes is not automatically better because it costs more.
Source: Natural Resources Canada