Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer
Zoning: Convert tubing, insulation, heat source and controls into cost per m². Zones depend on rooms/thermostat/price.
Why it matters
The part people skip in zoning is Rooms, Thermostat, Manifold; without it the conclusion is unreliable.
Step by step
- Run a room-by-room heat loss calculation.
- Check whether the floor can host tubing.
- Choose the heat source from the required water temperature.
- Then plan zoning and controls.
Common mistakes
- Skipping the heat loss calculation.
- Spacing set too wide.
- Missing insulation below.
- Using a heat source that cannot reach the water temperature.
Checklist
- Heat loss/floor/water temp/zoning/permits.
- Floor section drawing.
- Heat source spec.
- Three quotes.
- Control plan.
Who it is for
If you are calculating total cost, include Rooms., Thermostat. and upkeep, not just the purchase price.
Key facts
- Rooms.
- Thermostat.
- Manifold.
FAQ
Zoning: Cost per Square Metre
Zoning: Convert tubing, insulation, heat source and controls into cost per m². Zones depend on rooms/thermostat/price.
What should I check before buying a Zoning?
Zones depend on rooms/thermostat/price. Key checks: Rooms.; Thermostat..
Is a Zoning worth it?
Depends on use, budget and upkeep; a Zoning is not automatically better because it costs more.
Source: Natural Resources Canada